Wearing Motorcycle Cooling Vest is definitely a good idea if you ride in hot weather. The best way to get the most out of these vests is to understand how they work, and this article covers it.
During hot weather, riding your motorcycle tends to become increasingly uncomfortable, which is exactly when most riders will seek methods to remove heat from their bodies.
Cooling vests usually have an interior made of a water resistant material that keeps water away from the body. The best way to avoid getting wet is to wring it out, since otherwise water will leak out and make you wet. It is a good idea to put a cooling vest over your shirt, and then put a riding jacket on top.
Define Motorcycle Cooling Vest
Motorcyclist cooling vests can provide relief for several hours by lowering or maintaining the motorcyclist’s core temperature. The cooling effect of motorcycle cooling vests is limited in areas with high humidity, since they work better in arid climates.
Motorcycle Cooling Vest Workflow
Evaporative cooling is the principle behind motorcycle cooling vests. Water evaporates at high temperatures, causing a lower body temperature and drawing heat away from the vest.
These vests contain water absorbing materials, which soak up and hold water, which then slowly releases it while dehydrating, decreasing the rider’s body temperature in the process.
It is then anticipated that the cooling vest will provide a cooling effect over time. Once the cooling vest stops working, you will need to soak it again to make it work again.
Fly Racing Cooling Vest
Over 20 years of high quality apparel development on cooling vest have made Fly Racing a leader in the industry. A two minute soak is all it takes for these motorcycle cooling vests to work. The water holding capacity of these containers is among the strongest on the market.
These vests are filled with water and feature an evaporative cooling system that evaporates the water over time, making them a great choice for long days in the saddle.
These vests are lightweight and roll up neatly when not in use, so you also like their feel and fit.
Revit Cooling Vest
Designed specifically for Revit jackets, Revit liquid cooling vests keep your body cool throughout the day. Ideally, they should be worn with mesh jackets or other well-ventilated clothing.
This vest’s comfort and fitting are provided by the stretchy four way mesh outer fabric.
As water evaporates from the inner compartment, it is released by using Hyperkewl technology. An active vest will last approximately 6 hours when worn with a mesh jacket.
Macna Dry Evo Cooling Vest
Due to their ease of use and long cooling time, Macna Dry motorcycle cooling vests have gained some popularity in recent years. It is estimated that a vest filled with 500 milliliters can be worn for up to three days. These evaporative products are also treated with antibacterial properties and feature the same evaporative technology as the above products. Up to 3 days of comfort can be enjoyed by simply filling the reservoir at the back.
Alpine-Stars Cooling Vest
During those hot rides, the Alpine-stars motorcycle cooling vests release moisture through a cooling system. They also reduce the risk of fatigue and heat exhaustion due to temperature regulation.
These motorcycle cooling vests provide a comfortable fit thanks to their anatomical design. For greater comfort, stretch inserts are included as well as ventilation ports to ensure breathability and ventilation.
It is lightweight and the chambers can be topped up throughout the day, so no need to carry a lot of extra batteries around. Furthermore, the vests feature an antibacterial liner made of three layers of textile.
Harley Davidson Cooling Vest
Through the use of evaporation, these Harley Davidson vests regulate your body temperature while driving.
Users will feel cooling after 2 minutes soaking in the liner, which absorbs water and allows it to evaporate at higher temperatures. Their 100 percent nylon construction makes them lightweight, compact, and comfortable. Hyerkewl fabric makes up the inner, and stretch side panels add further comfort.
Motorcycle Cooling Vests Pros & Cons
01. Less Fatigue
Cooling vests have the advantage of keeping you cool while you ride your motorcycle, which reduces your overall fatigue. It is more likely that you will make a mistake in warmer weather because you will tire out faster. The temperature can make a big difference if you are riding a motorcycle, and a simple piece of gear like a cooling vest can help you stay alert and less tired while riding.
02. Too Much Weight
Some people might find the weight uncomfortable, even though it is not much. Vests that provide cooling will soak up some water and use it to cool you. It depends on the vest, but generally, water cooling vests absorb between 2 and 8 pounds of water.
As a result, the cooling vest will inevitably feel heavier on your back due to its extra water weight. Additionally, this extra weight will diminish as the water in the cooling vest slowly evaporates.
03. Not Useful in Humid Weather
If you are riding your motorcycle in hot weather, you should invest in a cooling vest. As you move, the vest and jacket force some air between each other and through the jacket. There will be no noticeable cooling effect at humid weather when there are no winds or breezes.
A cooling vest may also have to be soaked multiple times on long rides, and in humid parts of the world, they will be less effective.
04. Keep your Body Cool
The sole purpose of cooling vest is to keep us from overheating when the weather outside is extremely hot. Keeping cool when the weather outside is hot is easy and affordable with motorcycle cooling vests. If a cooling vest is worn, the rider’s body temperature may be reduced 10 degree to 35 degree Fahrenheit.
05. Damp Spots
In addition, your clothes underneath your cooling vest may have some damp spots due to the dampness and moisture you have felt while wearing it.
The cooling vest will become damp after being soaked, or completely submerged underwater, so there will be a small amount of water left on the inside, which can leak from the bottom.
Shake the cooling vest well before putting it back on or at least leave it hanging for a couple of minutes to let the moisture drip down. This will reduce the chances of moisture getting on your pants or shirt.
